where the Stitch and Community matter®
Emblems
Replies to This Discussion
-
Permalink Reply by David Davies on -
I don't think you can sew into a corner with a Merrow MG-3U. I wish you could.
-
Permalink Reply by Robyn on -
Some people will use their embroidery machines to finish the inside tight corners.
-
Permalink Reply by Mike Rieker on -
I love my Merrow machines, I have 4 and I don't even sew. I have played with and modified, sorry Charlie, an old A-3DW to sew a perfect merrow edge. The key is the thread, and some minor mods to the machine, but corners, like playing at Carnegie Hall, take practice, practice, practice. I also do emblems and I have not gone to the expense of an MG-3U because I frankly can't afford it for the volume of business that I do. I use pre made emblems that have that nice Merrow edge already in place. I don't seem to have enough Korean or Chinese, or whatever it takes, in me to negotiate those corners and I get tense getting my fingers that close to a needle moving at the speed of sound. Pre-made emblems have limitations but for standard sizes they can't be beat. Check out my website. www.patchthing.com.
-
Permalink Reply by javuier porras on
-
i need buy thread for the merrow to overlock mg3u but in spain don´t find, please help me
my web site is www.emblemasmilitares.es
SewCat - the Sewing Catalog Superstore!
more than 70,000 products for the textile industry!
Badge
Latest Activity
David Davies posted a discussionMG-3U Looper Video
Charlie, Any chance you can upload a better video on how to set the loopers? I was having issues tonight. The machine would make a chain like a champ but as soon as put a patch on the machine the upper looper thread would break. Many times many times. I figured it was an adjustment issue. I tried to adjust the lower looper so that the point was slightly above the eye of the needle. This required an adjustment of the upper looper and when adjusting the upper looper it snapped in two. I…See More
Martin Rodarte commented on Martin Rodarte's photo
Merrow MG 3U Machine4
"I have not received the machine yet, it should arrive this Friday 4-27-12
Martin"
Linda Chan replied to Linda Chan's discussion 'New' old Merrow 60w"Hello Charlie,
I have left messages with Hoffman Brothers and have not received a response as of yet. I have, however, found that the bubbler on the machine was just loose and that is why it was leaking. It still does not sew properly. Do you know…"
MJ Lindsey posted a discussionWhere do I purchase the oil to put into my M-Class Merrow machine?
Does anyone have an online site to purchase the oil for my M-Class machine? (best price)Thanks!See More
© 2012 Created by charlie merrow.
